Betaflight Omnibus F4 V3 Flight Controller Board Built-in Barometer OSD

Specification:

Item name: F4 V3 Flight Controller

Size: 36x36mm

Mount holes: 30.5x30.5mm

Features:

-STM32 F405 MCU

-Dshot support

-Drag and Drop OSD configured via Betaflight Configurator

-Smartaudio v2 support ndash Tune your PIDrsquos and configure the omnibus F C from your Transmitter

-MPU6000 6 axis SPI Gyro & Accelerometer

-SBUS/PPM AND Spketrum dsm-x Ports

-MicroSD card blackbox

-Baro(BMP280)

-5v3a SBEC

-On-board Video Filter(only can supply 5V to VTX and Camera)

-SmartAudio V2 via tx6 on J10

-4times3 pin ESC pin layout

-IR pins for lap timing transponder

Package included:

1* F4 V3 Flight Controller

GPS Chip parameters:

Receiver type 72-channel u-blox M8 engine

GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1

SBAS L1 C/A: WAAS, EGNOS, MSAS

Galileo-ready E1B/C (NEO-M8N)

Nav. update rate1 Single GNSS: up to 18 HZ

Concurrent GNSS: up to 10 Hz

Position accuracy2 2.0 m CEP

Acquisition2 Cold starts: 26 s

Aided starts: 2 s

Reacquisition: 1.5 s

Sensitivity2 Tracking & Nav: –167 dBm

Cold starts: –148 dBm

Hot starts: –156 dBm

Assistance AssistNow GNSS Online

AssistNow GNSS Offline (up to 35 days)3

AssistNow Autonomous (up to 6 days)

OMA SUPL & 3GPP compliant

Oscillator TCXO (NEO-M8N/Q),

Crystal (NEO-M8M)

RTC crystal Built-In

Noise figure On-chip LNA (NEO-M8M). Extra LNA for

lowest noise figure (NEO-M8N/Q)

Anti jamming Active CW detection and removal. Extra

onboard SAW band pass filter (NEO-M8N/Q)

Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)

Supported antennas Active and passive

Odometer Travelled distance

Data-logger For position, velocity, and time (NEO-M8N)

Operating temp. –40° C to 85° C

Storage temp. –40° C to 85° C (NEO-M8N/Q)

–40° C to 105° C (NEO-M8M)

RoHS compliant (lead-free)

Qualification according to ISO 16750

Manufactured and fully tested in ISO/TS 16949 certified production sites

Uses u-blox M8 chips qualified according to AEC-Q100

Supply voltage 1.65 V to 3.6 V (NEO-M8M)

2.7 V to 3.6 V (NEO-M8N/Q)

Power consumption4 23 mA @ 3.0 V (continuous)

5 mA @ 3.0 V Power Save Mode

(1 Hz, GPS mode only)

Backup Supply 1.4 to 3.6 V

NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,

TCXO, flash, SAW, LNA,

Timepulse Configurable 0.25 Hz to 10 MHz

Package including:

1 X NEO M8N GPS Module with Shell

1 X F4 V3 Flight Controller




Get 20% off your order

Or 6 weekly interest free payments from $7.66 with what's this?