GEPRC GEP-KX5 | Drones | Drones Xpress
The one-in-all high accurate CNC arm is made of 3K pure carbon fiber plates, whose structure is simple but solid. The arm is quite narrow (14mm) so the wind resistance will be smaller.
The front part and rear part are supported by aluminum pieces, while the side board connects with the aluminum parts, making the structure solid and firm. Besides, such a structure can efficiently protect the electronic equipment inside the machine. The LED rear light board is fixed by a square aluminum post, where a buzzer for seeking the machine is available. Therefore, it is quite practical and good-looking.
By True X structure, it is suitable for competition and freestyle fly.
There are six 2812 rear lights and a bb sound. When flying, the lights are cool and the flight is easy to be found because of the buzzer.
The 2mm bottom board can well guarantee the flight control; also, it can protect the components from being damaged when collapsing and landing.
YFS screws (strength: grade 12.9) can ensure a good hardness.
One PDB distribution board with BEC (5/12v output) is available, integrating with XT60.
Item Name: GEP-KX5 Elegant
Props Size: 5inch
Arms board: 4mm
Base board: 2mm
Side board: 1.0mm Recommended(Not Included): Flight Control
ler: F3 /F4/Naze32/ CC3D Motor
s: 2204/2205/2206/2305/2306 ESC
: 20A-35A Propeller
: 5inch Battery
: 3S 1300mAh ~ 4S 1500mAh
Package size: 20 * 20 * 2.5cm / 7.9 * 7.9 * 1.0in
Package weight: 290g
General box package
1 * Frame
2 * Aluminum part
1 * PDB with 5/12v Output
1 * XT60 Connector
1 * Battery
1 * Tail LEDs Board
Product is shipped from China.
The onus is on the buyer to investigate and pay any duties or local taxes.
Please check all local laws and safety regulations prior to purchase.