Matek FCHUB-W PDB Power Distribution Board 3-6S Built-in 4 BEC

Drones Xpress

  • $31.99 AUD
Free Shipping (13-20 days)

Only 10 left!


Matek FCHUB-W PDB Power Distribution Board 3-6S Built-in 4 BEC | Parts & Accessories | Drones Xpress

Matek FCHUB-W PDB Power Distribution Board 3-6S Built-in 4 BEC

Features:


100% Original Matek Brand for RC racing quadcopter
Lightweight, exquisite workmanship and high-efficiency
Wide input voltage range 9~30V (3~6S LiPo) w/ TVS protection
FPV 3-6S power distribution board with 4 BEC for FPV drone quadcopter
The PDB made of high-quality material can provide the highest performance
Built-in 104A current sensor and connect the Matek flight controller conveniently

Specifications:


Input voltage range: 9~30V (3~6S LiPo) w/ TVS protection
Current Senor: 104A, 3.3V ADC, Scale 317
Mounting: 30.5 * 30.5mm, Φ3mm
Dimensions: 52 * 36 * 6mm
Weight: 13g
2 ESC power pads
4 BEC on board
3 LED indicators for 5V, 10V & Vx

Soldering Holes & Pads:
+ & -: Battery & ESC power pads
Curr: Current sensor output
Vbat: Battery voltage
G: Ground
3V3: LDO 3.3V
5V: BEC 5V
10V: BEC 10V
Vx: BEC 5V/6V/7.2V ADJ

FFC connection:
Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD
MT1: Motor1 of INAV Flying Wing & Airplane
MT2: Motor2 of INAV Flying Wing & Airplane
SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane
VTX: Video Transmitter signal
TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSD

BEC 5V output:
Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module
DC/DC synchronous buck regulator
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps, Max.3A
Output Ripple: 20mV (VIn=24V, VOut=5V@2A load)
Short-circuit tolerant (2 seconds)

BEC 10V output:
Designed for Video Transmitter, Gimble
DC/DC synchronous buck regulator
Voltage: 10.0 +/- 0.2VDC (Input voltage >11V)
Continuous current: 2 Amps, Max.3A
Output Ripple: 20mV (VIn=24V, VOut=10V@2A load)
Short-circuit tolerant (2 seconds)

BEC Vx output:
Designed for Servos
DC/DC synchronous buck regulator
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.5.5A
Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
Short-circuit tolerant (2 seconds)

BEC 3.3V output
Designed for Baro / Compass module and Spektrum RX
Linear Regulator
Continuous current: 500mA

Kindly reminder:
There could be a few deviations due to manual measurement. Thank you for your attention

Package information:


Package size: 8.5 * 8 * 1cm / 3.35 * 3.15 * 0.39in
Package weight: 20g / 0.7oz
Poly bag package

Package included:
1 * Matek FCHUB-W PDB
1 * Connector
1 * Screws Set

DISCLAIMER

Product is shipped from China.
The onus is on the buyer to investigate and pay any duties or local taxes.
Please check all local laws and safety regulations prior to purchase.

We Also Recommend


Or 6 weekly interest free payments from $5.33 with what's this?